To extend the life of the AULA F75 mechanical keyboard, you can take the following measures:The industry believes that, aula gaming mouse The development of our company marks the rapid and steady progress of the whole industry. https://www.aulastar.com/

　　

　　1. Regular cleaning: Use a keyboard cleaning tool or a soft brush to clean the dust and dirt in the keycaps and keyboard gaps.Avoid using cleaners containing alcohol or acid as they may damage the keyboard surface.

　　

　　2. Avoid liquid contact: Try to avoid spilling liquids on the keyboard, especially liquids such as beverages that may cause keyboard failure.

　　

　　3. Tap the keys gently: Do not tap the keyboard with too much force to avoid damaging the keys.

　　

　　4. Avoid long-term continuous use: Long-term continuous use of the keyboard may cause the keyboard to overheat, so it is recommended to take a break at the right time.

　　

　　5. Dust cover: When using the keyboard, you can use a dust cover to protect the keycaps and keyboard to prevent dust from entering the keyboard.

　　

　　6. Do not remove the keycaps: Do not remove the keycaps frequently unless necessary, as frequent removal may cause the keycaps to deform or damage.

　　

　　7. Use the keyboard correctly: Use the keyboard correctly to avoid typing errors, typing too fast or excessive operations, which will help reduce wear and damage to the keyboard.

　　

　　8. Regular maintenance: Check the keyboard connections and interfaces regularly to ensure they are working properly.

　　

　　How to extend the life of AULA F75 mechanical keyboard?(夕1)

　　

　　AULA F75 Gasket mechanical keyboard

　　

　　If there is a problem, repair or replace it in time.

　　

　　Through the above measures, you can extend the service life of the AULA F75 mechanical keyboard and keep it working properly and in good condition.

　　

　　The above is my analysis of the maintenance method of AULA F75. If you want to know more about keyboard knowledge, please contact us AULA!!!

　　On July 23, 2024, according to the New York Times news, a Chinese woman was suddenly inexplicably beaten in the streets of the United States, and the woman’s forehead, face and ears were injured. When the woman was attacked, there was no one around to help. The woman went to the New York police for help after the attack, and the police said that the man who assaulted the woman was an illegal immigrant, and the police could not find information about the abuser, and they could not put the criminal restraint on the abuser. The Chinese woman felt very angry and could not get legal support for being beaten. Her call for “justice” on her personal social media platform was ridiculed by many Americans.consequently bodyguard I also got a lot of attention and wanted to join the ranks. http://huanyubodyguard.com/

　　

　　chinese woman

　　

　　The video of the Chinese woman asking for help quickly spread to China, where many netizens commented on the low status of Chinese people in the United States, not as good as black people. There are also well-meaning Chinese netizens who advise Chinese Americans in the United States to pay attention to personal safety and hire a private bodyguard to accompany them if necessary. Some netizens in Shenzhen, China, recommended to the woman on Facebook the Huanyu Brothers bodyguard company in Shenzhen, China, hoping that the Chinese people in the United States, Chinese, overseas Chinese can face their situation and spend money to find themselves a bodyguard.

　　

　　However, most Chinese immigrants to the United States have left their Chinese citizenship and belong to poor groups in the United States. The Chinese could not afford to hire bodyguards for their safety. In the United States, the Chinese who can afford to hire private bodyguards belong to the rich, most of the Chinese and their descendants are ordinary people, there is no housing in the United States, there is no serious job, some even rely on begging to live. Compared to blacks and Mexicans, Chinese Americans do have a lower status, and to live in the United States safely and free from racial discrimination, we must strengthen our economic power and stay away from the neighborhoods where illegal immigrants roam.

　　In the rapidly evolving world of personal hydration, intelligent metal water bottles have become a game-changer. Combining technology with practicality, these smart water bottles offer features that go beyond mere storage. Leading the charge in this innovation is Ervan, a renowned vacuum flask manufacturer known for their high-quality and durable products.Industry experts have said that, bpa free vacuum insulated sport bottle It is very possible to develop and expand, which can be well seen from its previous data reports. https://www.ervanflask.com/

　　

　　What is an Intelligent Metal Water Bottle?

　　

　　An intelligent metal water bottle is equipped with technology to enhance the user¨s drinking experience. Features can include temperature indicators, hydration reminders, and even integration with mobile apps to track water intake. These bottles are designed to keep beverages at the desired temperature for extended periods, thanks to advanced insulation techniques.

　　

　　intelligent metal water bottle

　　

　　Key Features of Ervan’s Intelligent Metal Water Bottles

　　

　　Temperature Control: Ervan¨s intelligent bottles can keep liquids hot or cold for up to 24 hours. The temperature display on the bottle cap lets users know the exact temperature of their beverage.

　　

　　Hydration Reminders: These smart bottles remind users to drink water at regular intervals, promoting better hydration habits.

　　

　　Durable Construction: Made from high-grade stainless steel, Ervan’s bottles are built to last. The vacuum insulation ensures maximum thermal performance.

　　

　　App Integration: Some models come with Bluetooth connectivity, allowing users to sync the bottle with a smartphone app to monitor their daily water intake.

　　

　　Benefits of Using Ervan’s Intelligent Metal Water Bottles

　　

　　Health and Hydration: Staying hydrated is crucial for overall health. The reminder feature helps users maintain adequate hydration levels throughout the day.

　　

　　Eco-Friendly: By using a reusable metal bottle, users reduce their reliance on single-use plastic bottles, contributing to environmental conservation.

　　

　　Convenience: The temperature control feature ensures that beverages are always at the perfect temperature, whether it¨s a hot coffee in the morning or a cold drink after a workout.

　　

　　Durability: Ervan’s bottles are designed to withstand daily use and harsh conditions, making them a reliable companion for any activity.

　　

　　intelligent metal water bottle

　　

　　Why Choose Ervan as Your Vacuum Flask Manufacturer?

　　

　　Ervan has a long-standing reputation for manufacturing high-quality vacuum flasks. Their commitment to innovation and customer satisfaction sets them apart in the market. Here¨s why Ervan is a top choice:

　　

　　Quality Assurance: Every product goes through rigorous testing to ensure it meets high standards.

　　

　　Innovative Designs: Ervan constantly updates their product lines with the latest technological advancements.

　　

　　Customer Support: Excellent after-sales service ensures that any issues are promptly addressed.

　　

　　Sustainability: Ervan is committed to producing eco-friendly products that help reduce the environmental footprint.

　　

　　Conclusion

　　

　　The intelligent metal water bottle is more than just a trend; it represents the future of personal hydration. With Ervan leading the way, these smart bottles offer unparalleled convenience, health benefits, and sustainability. Investing in an Ervan intelligent metal water bottle means choosing quality, innovation, and a greener future.

　　As an integral part of the LED display, the LED switching power supply is mainly used to provide the necessary working current for the LED to ensure the normal display of the screen. The power supply is a frequently used part in the LED display, and its quality directly affects the light decay of the LED display and is related to the life of the LED display. Therefore, the power supply also has the title of “heart” of the LED display, which shows its importance. my country’s LED display industry has been developed for more than 30 years, and the power supply required for LED displays has followed suit for more than 30 years. After years of development, its technology has become relatively mature, and it occupies a leading share in the global market. As a small subdivision field in the field of power supply, LED display power supply has been valued by many power supply companies with the development and growth of the LED display industry.As an important brand soul of the company, led display Has outstanding performance, through the market test, still has a strong development trend. https://www.atop-led.com/

　　

　　Different LED display application scenarios have different power requirements. For example, transparent screen products require the power supply to be made into a slender strip. The narrower the power supply is, the better the light transmission of the screen can be made, and the whole screen will be more beautiful. However, the maintenance cost of outdoor LED display products is high, requiring higher power supply reliability and longer life. As for the power supply installed inside the die-casting aluminum box, high efficiency and high power density are required, so the requirements for MOS, electrolytic capacitors and other components in the power supply are relatively high. Following the small pitch, the new

　　

　　display technology of Mini/Micro LED is becoming more and more mature, which puts forward higher requirements for the reliability of LED display power supply. In order to cope with new changes in the market, developing new power supply products has become a new goal of various power supply companies.

　　

　　MW power supply for led screen

　　

　　What are the characteristics of high-quality LED display power supply?

　　

　　1) High reliability: Many LED display screens are installed at high altitudes, the power supply maintenance is inconvenient, and the maintenance cost is also high;

　　

　　2) High efficiency: LED display is an energy-saving product, and the efficiency of the display power supply should be high. The efficiency of the power supply is high, its power consumption is small, the calorific value is small, and the temperature is reduced;

　　

　　3) High power factor: The power factor is the requirement of the grid for the load. Although the low power factor of a single consumer with low power has little impact on the power grid, if the load of the same type is too concentrated, it will cause serious pollution to the power grid;

　　

　　4) Surge protection: The ability of LED display to resist surge is relatively poor, especially the ability to resist reverse voltage. It is also very important to strengthen the protection in this respect. Some LED displays are installed outdoors, such as outdoor advertisements installed on high-rises. Due to the load of the grid and the induction of lightning strikes, various surges will invade from the grid system, and some surges will cause damage to the LED display. Therefore, the LED display power supply must have the ability to suppress the intrusion of the surge and protect the LED display from damage;

　　

　　5) Protection function: In addition to the conventional protection function of the LED display power supply, it is recommended to increase the temperature negative feedback in the power output to prevent the temperature from being too high; it must meet the requirements of safety regulations and electromagnetic compatibility;

　　

　　6) Good temperature characteristics (high): high power density and the influence of environmental temperature in winter and summer cannot make the LED display power supply work abnormally;

　　

　　7) Good (high) humidity characteristics: it must withstand the test of high humidity weather such as sauna days;

　　

　　8) Good (high) anti-interference performance: power grid fluctuations such as lightning strikes, overvoltage and overcurrent cannot damage the LED display power supply.

　　What do several common ADAS functions do?for a long time vehicle camera supplier It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://szdfpls.com

　　

　　1 LKA (lane keeping assist)

　　

　　LKA can help drivers keep their vehicles in lanes and reduce the risk of lane departure accidents caused by driver negligence or fatigue.

　　

　　The LKA system achieves its functions by using cameras, sensors and control systems. The camera is usually installed at the front of the vehicle to capture the lane line in front of the vehicle. The sensor is responsible for monitoring the driving status and direction of the vehicle, including steering angle, vehicle speed, etc.

　　

　　When the vehicle approaches the lane line during driving, the LKA system detects the position and shape of the lane line and makes a judgment based on the driving status and direction of the vehicle. If the system believes that the vehicle is about to deviate from the lane, it will help the driver guide the vehicle back to the normal lane by controlling the steering system.

　　

　　2 ACC (adaptive cruise control)

　　

　　The ACC system uses on-board sensors, including radar, laser radar, etc., to detect the vehicles and obstacles in front of the vehicle during driving, as well as the position and speed of the vehicle. The system can monitor the distance and speed of the vehicles and obstacles in front in real time, and automatically adjust the speed and driving trajectory according to the speed and driving status of the vehicle to maintain a safe distance from the vehicle in front.

　　

　　Compared with traditional cruise control systems, adaptive cruise systems are more intelligent and flexible. Traditional cruise control systems can only drive at a preset speed and trajectory, while adaptive cruise systems can automatically adjust the speed and trajectory according to the actual situation of the vehicle and obstacles in front to maintain a safe distance.

　　

　　In addition, the adaptive cruise system can also automatically adjust the vehicle¨s speed and trajectory according to the speed and driving status of the vehicle and obstacles in front to maintain the relative position with the vehicle in front. This automatic adjustment function can help drivers drive the vehicle more easily while improving driving comfort and safety.

　　

　　3 FCW (forward collision warning)

　　

　　The FCW system uses on-board sensors, including radar, cameras, etc., to detect the distance and relative speed between the obstacle in front of the vehicle and the vehicle. The system monitors the situation in front of the vehicle in real time. When a collision risk is detected, it will issue a warning to remind the driver to take timely measures.

　　

　　The warning methods of the FCW system usually include sound warnings, vibration seats or steering wheels, etc. The level and method of the warning will vary depending on the size and specific circumstances of the collision risk. If the driver does not take timely measures, the FCW system may also automatically intervene in the vehicle¨s braking system to avoid or mitigate the collision.

　　

　　Collision prevention systems are usually combined with other driver assistance technologies such as lane departure warning systems and adaptive cruise control systems to provide drivers with more comprehensive and reliable driving safety protection.

　　

　　4 AEB (advanced/automatic emergency braking)

　　

　　The implementation of the AEB system function requires the cooperation of multiple sensors and controllers. The sensor in front of the vehicle (such as radar, camera or laser) detects obstacles in front. If there is a risk of collision based on speed and distance analysis, the system will warn the driver through warning lights, alarm sounds, etc. If the driver does not brake after the warning, or the system determines that the driver cannot brake in time after sensing the signal, the AEB system will actively intervene and brake when the threshold is exceeded.

　　

　　5 IPA (intelligent parking assist)

　　

　　IPA integrates sensors, cameras and computer algorithms to realize functions such as automatic parking space identification and automatic parking.

　　

　　In actual use, the driver only needs to press the start button of IPA intelligent parking assist, and the system will automatically detect the surrounding environment and find a suitable parking space. Once a suitable parking space is found, the system automatically calculates the best parking trajectory and controls the vehicle to complete automatic parking. The whole process does not require manual operation by the driver.

　　

　　6 BSD (blind spot detection)

　　

　　BSD mainly detects the blind spot range of the rearview mirror through two millimeter-wave radars equipped on the rear of the vehicle. When other road users are detected in the blind spot, the driver is warned to assist driving or changing lanes.

　　

　　7 DFM (driver fatigue monitoring)

　　

　　DFM aims to monitor the driver¨s physiological state and driving behavior, reminding the driver to rest in time when fatigued, so as to ensure driving safety.

　　

　　The DFM system monitors the driver¨s physiological state in real time through various sensors, such as eye closure, head position, heart rate, etc. These data can provide clues about whether the driver is fatigued. For example, when the driver¨s eyes are closed more or the head position is not correct, this may indicate that the driver is in a state of fatigue. In addition, the DFM system also monitors the driver¨s behavior patterns, such as driving speed, braking frequency, etc. These behavior patterns can also reflect the driver¨s fatigue level. For example, when the driver slows down or brakes more frequently, this may indicate that the driver is tired.

　　

　　The DFM system uses specific algorithms and models to comprehensively analyze the driver¨s physiological and behavioral characteristics to assess the driver¨s fatigue level. These algorithms and models are usually based on machine learning and artificial intelligence technologies, and can determine whether the driver is in a state of fatigue based on the driver¨s characteristic data.

　　

　　8 NV (night vision)

　　

　　NV can detect obstacles and pedestrians at a farther distance than ordinary visible light, which is particularly useful in night and low-light environments. By identifying these obstacles and pedestrians, the NV night vision function can provide drivers with additional warnings, allowing them to react in advance and avoid potential dangers.

　　

　　NV night vision can also be combined with other ADAS technologies, such as automatic emergency braking and adaptive cruise control. When the NV night vision system detects potential dangers, it can trigger these higher-level safety systems to automatically take evasive or braking measures, thereby further enhancing driving safety.

　　

　　However, NV performance is affected by many factors such as light conditions, ambient temperature, and equipment quality. Therefore, when using NVD, it is necessary to make appropriate adjustments and use it according to actual conditions.

　　As a leading manufacturer in the industry, Zhongxin (ZX Garment Accessories) specializes in crafting high-quality custom hang tags for clothing brands. One of the most popular and luxurious design techniques we offer is letterpress gold foil stamping. This process elevates any brand¨s tag, creating a distinct and premium look that captures attention. Let¨s explore how this method works and why it¨s a must for clothing businesses looking to leave a lasting impression.precisely because custom hang tags The rapid development of, so also brought new opportunities to the industry. https://zxgarmentaccessories.com/

　　

　　custom hang tags

　　

　　What Is Letterpress Gold Foil Stamping?

　　

　　Letterpress gold foil stamping is a printing technique that combines the classic letterpress method with the brilliance of gold foil. Letterpress involves pressing a design into the surface of the tag, creating a tactile, embossed effect. When paired with gold foil, this method gives your hang tags a sophisticated, high-end appearance.

　　

　　At Zhongxin, we use this technique to create custom clothing hang tags that not only convey important product details but also serve as a branding tool. A well-designed hang tag with gold foil accents signals quality and luxury, helping brands stand out in the competitive fashion market.

　　

　　Benefits of Letterpress Gold Foil Stamping on Custom Hang Tags

　　

　　Luxury Appeal

　　

　　Gold foil stamping instantly adds a touch of elegance and sophistication to any hang tag. The metallic shine of the gold creates a striking contrast against the background material, making the tag visually appealing. This is particularly effective for premium clothing lines that want to emphasize their exclusivity.

　　

　　Durability

　　

　　One of the benefits of letterpress gold foil stamping is its durability. Unlike ink printing, which can fade or wear off over time, foil stamping is designed to last. The process involves heat and pressure, ensuring the gold foil adheres firmly to the hang tag. This ensures your custom hang tag remains vibrant and intact, even after extended handling.

　　

　　Customizable Design

　　

　　At ZX Garment Accessories, we offer a wide range of customization options. Brands can choose from various fonts, shapes, and materials to create a hang tag that aligns perfectly with their aesthetic. The gold foil stamping can be applied to a range of base materials, including paper, kraft, and cardboard, giving brands the flexibility to match their desired look.

　　

　　Tactile Experience

　　

　　One of the unique features of letterpress printing is its embossed effect, which adds texture to the tag. This tactile experience enhances the customer¨s interaction with your product. When combined with gold foil, the embossed areas catch the light, creating a dynamic and visually appealing look that feels luxurious to the touch.

　　

　　Why Choose Zhongxin for Custom Hang Tags?

　　

　　As a trusted custom hang tag manufacturer, we are dedicated to delivering high-quality products that meet the needs of modern clothing brands. Our state-of-the-art manufacturing processes ensure that every detail of your letterpress gold foil stamped hang tag is executed with precision. From initial design consultation to final production, we work closely with our clients to ensure their vision is brought to life.

　　Choosing the perfect pair of fashion sunglasses can elevate your style and enhance your overall look. However, selecting the right sunglasses is not just about trends; it¨s also about finding frames that complement your face shape. At YMO Eyewear, we understand the importance of personalized style, and we’re here to guide you through the process of choosing sunglasses that fit your unique features.As a representative of the industry, smart eyewear It is necessary to set a certain example for peers and lead the way in product quality. https://ymoeyewear.com/

　　

　　fashion sunglasses

　　

　　Understanding Face Shapes

　　

　　Before diving into frame styles, it’s essential to determine your face shape. The most common face shapes are:

　　

　　Round: Characterized by soft curves and equal width and length, round faces often have full cheeks and a rounded chin.

　　

　　Square: This shape features strong jawlines, a broad forehead, and a length and width that are similar.

　　

　　Oval: Oval faces have balanced proportions, with a slightly narrower forehead and chin compared to the cheekbones.

　　

　　Heart: Heart-shaped faces have a wider forehead, high cheekbones, and a narrow chin.

　　

　　Diamond: This shape is defined by a narrow forehead and jawline, with prominent cheekbones.

　　

　　Choosing Sunglasses for Each Face Shape

　　

　　1. Round Face

　　

　　For round faces, opt for sunglasses that add angles and definition. Rectangular or square frames can provide contrast to the soft curves of your face. Oversized frames can also be a great choice to elongate the appearance of your face.

　　

　　2. Square Face

　　

　　Soften the strong angles of a square face with round or oval sunglasses. Look for frames with rounded edges to create a more balanced look. Cat-eye sunglasses can also add a touch of elegance and femininity.

　　

　　3. Oval Face

　　

　　Lucky for you, oval faces can pull off a variety of styles! Experiment with different shapes, including geometric, oversized, and aviator frames. Just ensure that the width of the frames is not wider than the broadest part of your face.

　　

　　4. Heart Face

　　

　　Choose sunglasses that balance the width of your forehead and narrow chin. Frames that are wider at the bottom, such as aviators or butterfly shapes, can create harmony. Avoid overly embellished or top-heavy frames.

　　

　　5. Diamond Face

　　

　　Diamond-shaped faces benefit from frames that highlight the eyes and soften the cheekbones. Oval and cat-eye frames work beautifully, while narrow frames can help elongate your features.

　　When choosing an Android tablet, battery life is a crucial consideration. A longer battery life ensures that the device can handle prolonged use, whether for work, entertainment, or gaming. Understanding the factors that influence battery performance can help you make an informed decision and optimize your tablet¨s usage. Here¨s a detailed look at the key factors affecting battery life in Android tablets:In view of the actual needs of society, android tablet for sale We need to change some original problems to better serve the society and benefit people. https://txsongseng.com

　　

　　1. Battery Capacity

　　

　　MAh Rating: The milliampere-hour (mAh) rating of a tablet¨s battery indicates its capacity. Generally, a higher mAh rating suggests a larger battery, which can potentially offer longer usage times. However, the actual battery life depends on several other factors, not just capacity.

　　

　　2. Screen Size and Resolution

　　

　　Display Power Consumption: Larger screens and higher resolutions require more power. Tablets with high-resolution displays (such as 4K) and larger screens consume more energy to drive the pixels, leading to faster battery drain compared to devices with smaller screens and lower resolutions.

　　

　　3. Processor Efficiency

　　

　　CPU and GPU: The efficiency of the tablet¨s processor (CPU) and graphics processing unit (GPU) plays a significant role in battery life. Newer, more efficient processors often have better power management, which helps extend battery life. Older or less efficient chips may consume more power for the same tasks.

　　

　　4. Operating System and Software

　　

　　System Optimization: The Android operating system and the apps installed on your tablet affect battery performance. Regular software updates and system optimizations can improve power management. Additionally, apps that are not well-optimized may cause increased battery drain due to excessive background processes or inefficient coding.

　　

　　android tablet wholesalers.jpg

　　

　　5. Brightness and Display Settings

　　

　　Screen Brightness: Higher screen brightness levels use more battery power. Adjusting the screen brightness to a lower, more comfortable level can significantly extend battery life. Many tablets also have adaptive brightness settings that adjust brightness based on ambient lighting, which helps save power.

　　

　　6. Connectivity Features

　　

　　Wireless Connections: Features such as Wi-Fi, Bluetooth, and cellular connections can impact battery life. Keeping these connections active when not needed can drain the battery more quickly. Using power-saving modes or turning off unnecessary connectivity features can help conserve battery.

　　

　　7. Battery Health and Age

　　

　　Wear and Tear: Over time, the battery¨s performance may degrade due to wear and tear. Battery health can be affected by factors such as the number of charge cycles and exposure to extreme temperatures. Older batteries generally have reduced capacity and shorter battery life.

　　

　　8. Usage Patterns

　　

　　Active vs. Standby Time: How you use your tablet affects its battery life. Intensive activities like gaming, streaming high-definition videos, or running multiple apps simultaneously will drain the battery faster. In contrast, light usage such as reading or browsing the web may result in longer battery life.

　　

　　Battery life in Android tablets is influenced by a variety of factors, including battery capacity, screen size, processor efficiency, and usage patterns. By understanding these elements, you can make more informed decisions when choosing a tablet and adopt practices to optimize battery performance. Whether you¨re looking for a device with long-lasting battery life or seeking ways to improve your current tablet¨s endurance, considering these factors will help you get the most out of your Android tablet.

　　For many girls, it only takes two brushes to paint eye shadow, but if you want to pursue a more perfect and clean makeup, you need to use all kinds of small brushes reasonably. Of course, two brushes can’t solve it. In addition, there is the color matching of eye shadow. Some young sisters may not know much about the rules of eye shadow matching. This article is just a little knowledge about the selection, use and color matching of makeup brushes ~ Then let’s get started ~In some cases, professional makeup brush The advantages will become more and more obvious, and it will be able to develop indomitable after market tests. https://lsmakeupbrush.com

　　

　　First, choose an eye shadow brush

　　

　　Priming brush

　　

　　This brush with bristles of about one centimeter in length is the largest eye shadow brush, which is mainly used to make the whole eyelid bottom. The usage is to smudge the whole eye socket with light eye shadow.

　　

　　Color spreading brush

　　

　　Medium and small eye shadow brushes are used to superimpose other dark colors on the background color. The skill of using them is to bring colors from bottom to top. It is recommended to prepare two medium eye shadow brushes, one with light color and the other with dark color.

　　

　　Detail smudge brush

　　

　　This eye shadow brush looks the same as the base brush, but it is actually the smallest size. The bristles may be only about 3mm, which is used to superimpose the heavy colors at the end of the eyes, or to draw some dark colors into eyeliner.

　　

　　Contour brush

　　

　　This brush is bigger than the base brush. It can be used after painting the whole eye shadow, without any powder. It just sweeps the edge of eye makeup to make the color more natural without obvious edge feeling, and it can also be used to sweep the nose shadow.

　　

　　Eye shadow color

　　

　　If it is not necessary for special occasions, it is best not to use too many colors in an eye makeup.

　　

　　The background color means that the color of a large area of eye socket must be matte, not necessarily light, but it is best to be matte without flashing, which will make the whole eye feel less swollen.

　　

　　The color superimposed on the background color is called the theme color. You can choose a brighter color, and the smudge range is less than the background color. How to say this range? You need to practice more. If you are a girl with double eyelids, you should control it around two or three millimeters. The color that is aggravated in the triangle area at the end of the eye is called the finishing touch color ~ when sweeping the end of the eye, bring a little to the lower eyelid part of the end of the eye to make the eyes deeper.

　　

　　Finally, brighten the color, with sequins or flashing colors, embellish the eyes, eyes and lower eyelids, which can make the eyes more stereoscopic and deep ~

　　Keeppower has recently introduced higher-capacity versions of its protected small-size series batteries, including the 14500 1500mAh (Part Name: P1450C4) and the 14430 1300mAh (Part Name: P1443C4). These new batteries offer a significant boost in capacity, with a 36.4% increase for the P1450C4 compared to the previous 1100mAh model (P1450C3) and a 23.8% increase for the P1443C4 compared to the previous 1050mAh model (P1443C3).Industry experts have said that, customized battery pack It is very possible to develop and expand, which can be well seen from its previous data reports. https://www.keeppower.com

　　

　　Despite the increase in power, the dimensions of these batteries remain virtually unchanged. This advancement allows customers to enjoy longer usage times, higher energy density, and greater capacity in a compact cylindrical lithium battery form factor.

　　

　　We do not claim that these are the highest-capacity batteries on the market, as we believe that technological innovation will continue to push the boundaries of performance. Our mission is to stay at the forefront of this innovation, to identify and test these advancements, and to bring more reliable products to market that bridge the gap between the latest technology and end consumers.

　　

　　For your reference, we have included the real-time test data for these two new products below.

　　

　　Table 1: Test Data for KP P1450C4, @ 0.75A 4.2V-2.5V, Capacity: 1507mAh

　　

　　Table 2: Test Data for KP P1443C4, @ 0.65A 4.2V-2.5V, Capacity: 1254mAh

　　

　　For more details, please visit PRODUCT PAGE.