For many girls, it only takes two brushes to paint eye shadow, but if you want to pursue a more perfect and clean makeup, you need to use all kinds of small brushes reasonably. Of course, two brushes can’t solve it. In addition, there is the color matching of eye shadow. Some young sisters may not know much about the rules of eye shadow matching. This article is just a little knowledge about the selection, use and color matching of makeup brushes ~ Then let’s get started ~In some cases, professional makeup brush The advantages will become more and more obvious, and it will be able to develop indomitable after market tests. https://lsmakeupbrush.com

　　

　　First, choose an eye shadow brush

　　

　　Priming brush

　　

　　This brush with bristles of about one centimeter in length is the largest eye shadow brush, which is mainly used to make the whole eyelid bottom. The usage is to smudge the whole eye socket with light eye shadow.

　　

　　Color spreading brush

　　

　　Medium and small eye shadow brushes are used to superimpose other dark colors on the background color. The skill of using them is to bring colors from bottom to top. It is recommended to prepare two medium eye shadow brushes, one with light color and the other with dark color.

　　

　　Detail smudge brush

　　

　　This eye shadow brush looks the same as the base brush, but it is actually the smallest size. The bristles may be only about 3mm, which is used to superimpose the heavy colors at the end of the eyes, or to draw some dark colors into eyeliner.

　　

　　Contour brush

　　

　　This brush is bigger than the base brush. It can be used after painting the whole eye shadow, without any powder. It just sweeps the edge of eye makeup to make the color more natural without obvious edge feeling, and it can also be used to sweep the nose shadow.

　　

　　Eye shadow color

　　

　　If it is not necessary for special occasions, it is best not to use too many colors in an eye makeup.

　　

　　The background color means that the color of a large area of eye socket must be matte, not necessarily light, but it is best to be matte without flashing, which will make the whole eye feel less swollen.

　　

　　The color superimposed on the background color is called the theme color. You can choose a brighter color, and the smudge range is less than the background color. How to say this range? You need to practice more. If you are a girl with double eyelids, you should control it around two or three millimeters. The color that is aggravated in the triangle area at the end of the eye is called the finishing touch color ~ when sweeping the end of the eye, bring a little to the lower eyelid part of the end of the eye to make the eyes deeper.

　　

　　Finally, brighten the color, with sequins or flashing colors, embellish the eyes, eyes and lower eyelids, which can make the eyes more stereoscopic and deep ~

　　Keeppower has recently introduced higher-capacity versions of its protected small-size series batteries, including the 14500 1500mAh (Part Name: P1450C4) and the 14430 1300mAh (Part Name: P1443C4). These new batteries offer a significant boost in capacity, with a 36.4% increase for the P1450C4 compared to the previous 1100mAh model (P1450C3) and a 23.8% increase for the P1443C4 compared to the previous 1050mAh model (P1443C3).Industry experts have said that, customized battery pack It is very possible to develop and expand, which can be well seen from its previous data reports. https://www.keeppower.com

　　

　　Despite the increase in power, the dimensions of these batteries remain virtually unchanged. This advancement allows customers to enjoy longer usage times, higher energy density, and greater capacity in a compact cylindrical lithium battery form factor.

　　

　　We do not claim that these are the highest-capacity batteries on the market, as we believe that technological innovation will continue to push the boundaries of performance. Our mission is to stay at the forefront of this innovation, to identify and test these advancements, and to bring more reliable products to market that bridge the gap between the latest technology and end consumers.

　　

　　For your reference, we have included the real-time test data for these two new products below.

　　

　　Table 1: Test Data for KP P1450C4, @ 0.75A 4.2V-2.5V, Capacity: 1507mAh

　　

　　Table 2: Test Data for KP P1443C4, @ 0.65A 4.2V-2.5V, Capacity: 1254mAh

　　

　　For more details, please visit PRODUCT PAGE.

　　In today’s fast-paced technological landscape, the demand for reliable, durable, and efficient user interfaces is higher than ever. Membrane switches, known for their versatility and compact design, play a crucial role in a wide range of applications, from consumer electronics to industrial machinery. When it comes to sourcing high-quality membrane switches, Singway stands out as a leader in the industry. Here’s why Singway should be your go-to manufacturer for membrane switches.On the other hand, silicone rubber keyboard It also brings tangible benefits to everyone and feels useful. It is a model of the industry. https://singway-touch.com/

　　

　　singway membrane switches

　　

　　1. Unmatched Quality and Reliability

　　

　　At Singway, quality is paramount. Each membrane switch undergoes rigorous testing and quality control to ensure it meets the highest standards of performance and durability. Singway’s commitment to quality means that every switch is built to last, providing reliable operation even in the most demanding environments. This reliability ensures that your products maintain their functionality and performance over time, reducing the need for frequent replacements and repairs.

　　

　　2. Advanced Manufacturing Techniques

　　

　　Singway employs advanced manufacturing techniques and state-of-the-art equipment to produce membrane switches that are both precise and consistent. By leveraging the latest technology, Singway can achieve intricate designs and complex configurations, ensuring that each switch meets the specific requirements of your application. This precision manufacturing results in high-performance switches with excellent tactile feedback and responsiveness.

　　

　　3. Customization and Flexibility

　　

　　One of Singway’s key strengths is its ability to offer customized solutions tailored to your unique needs. Whether you require specific dimensions, unique graphics, or specialized functionalities, Singway can design and manufacture membrane switches that align perfectly with your specifications. This flexibility allows you to create products that stand out in the market and meet the exact demands of your customers.

　　

　　4. Wide Range of Applications

　　

　　Singway’s membrane switches are designed to cater to a diverse range of applications, including medical devices, automotive controls, consumer electronics, and industrial equipment. This versatility ensures that no matter your industry, Singway has the expertise and capability to provide the ideal membrane switch solution. Their extensive experience across various sectors guarantees that you receive switches that are perfectly suited to your application¨s specific requirements.

　　

　　5. Excellent Customer Support

　　

　　Singway prides itself on providing exceptional customer support throughout the entire manufacturing process. From initial consultation and design to production and delivery, Singway’s team of experts is dedicated to ensuring that your experience is seamless and satisfactory. Their proactive approach to customer service means that any issues or concerns are addressed promptly, ensuring that your project stays on track and within budget.

　　

　　6. Cost-Effective Solutions

　　

　　Despite offering top-notch quality and advanced features, Singway remains committed to providing cost-effective solutions. Their efficient manufacturing processes and economies of scale enable them to offer competitive pricing without compromising on quality. This affordability makes Singway an attractive partner for businesses looking to balance high performance with budget considerations.

　　

　　7. Sustainable and Eco-Friendly Practices

　　

　　Singway is dedicated to sustainable manufacturing practices and minimizing its environmental impact. They use eco-friendly materials and processes to produce membrane switches, ensuring that their products are safe for both users and the environment. By choosing Singway, you not only get high-quality switches but also contribute to a more sustainable future.

　　

　　8. Innovative Design Capabilities

　　

　　Innovation is at the heart of Singway’s approach to manufacturing. Their team of skilled designers and engineers continually explores new materials, technologies, and design methodologies to create membrane switches that push the boundaries of performance and aesthetics. This commitment to innovation ensures that you receive cutting-edge products that keep your offerings ahead of the competition.

　　

　　9. Global Reach and Timely Delivery

　　

　　With a robust global supply chain and efficient logistics, Singway ensures timely delivery of your membrane switches, no matter where you are located. Their ability to meet tight deadlines and deliver products on time is crucial for businesses that operate in fast-paced markets and rely on timely product launches and updates.

　　The varieties of medals and badges are generally determined by their different production processes. The most common production processes for medals and badges include enamel, paint, imitation enamel, stamping, screen printing, die-casting, etc. Today, we will introduce different production processes and their characteristics.among customized award It has given great spiritual support to entrepreneurs, and more entrepreneurs will contribute to this industry in the future. https://www.karonmetal.com

　　

　　

　　1. Production process – enamel

　　

　　As the most advanced coloring process, enamel is said to have been first recorded in the Yuan Dynasty, was most refined in the Ming Dynasty, and was already flourishing in the Qing Dynasty. Enamel badges, also known as cloisonn└ badges, are colored with enamel powder on red copper (purple copper). The color is dark and single, the cost is high, and it is fragile and cannot be knocked or faded by gravity. However, because of its strong color fixation and long preservation time, it is generally chosen to make commemorative medals that need to be preserved for a long time without fading, badges, medals, medals, etc. for state organs, military police, etc.

　　

　　2. Production process – imitation enamel

　　

　　Imitation enamel badges are generally colored with resin paint. The color is brighter than enamel and can be made of copper, zinc, alloy, etc. as the base material, with a strong sense of concave and convex. Soft enamel badges and resin are coloring materials developed by foreign experts. The surface can be plated with various metal colors such as gold and nickel. It is smooth and delicate, giving people a very noble feeling. It is suitable for high-end badge customization, mid-to-high-end commemorative medal production, commemorative medals and other exquisite products.

　　

　　How to distinguish enamel from imitation enamel: Real enamel has a ceramic texture, less color selection, and a hard surface. Puncture the surface with a needle will not leave marks, but it is easy to break. Imitation enamel is soft, and a needle can pierce the fake enamel layer. The color is bright, but it cannot be preserved for a long time. After three to five years, the color will turn yellow after high temperature or ultraviolet radiation.

　　With the rapid development of information technology and the increasing demand for data transmission, optical communication technology plays a vital role in modern networks. DWDM technology greatly increases the data transmission capacity by using multiple optical signals of different wavelengths to transmit simultaneously on one optical fiber. The tunable optical module can switch between multiple wavelengths to achieve flexible and efficient wavelength management. The 25G Tunable DWDM tunable optical module combines these two technologies to provide higher data rates and greater adaptability.contemporaneity 800g qsfp-dd Our competitors have not made large-scale improvements, so we should get ahead of everyone in the project. https://www.3coptics.com/

　　

　　5g fronthaul

　　

　　ETU-LINK 25G Tunable DWDM 15km optical module adopts advanced 25G tunable optical chip, combined with the self-made tunable TOSA and self-made APD/PIN chip solution of internal separation solution, which ensures the module to achieve stable transmission of 25G 15km on single-mode optical fiber. In addition, the module supports 96-channel transmission and can complete automatic wavelength adjustment in a short time, greatly improving the efficiency of network operation and maintenance.

　　

　　Product features:

　　

　　High-speed transmission: The module supports 25.78Gbps high-speed data transmission, covers a single-mode optical fiber distance of 15KM, and the transmission optical power range is between 0~5dBm, ensuring good transmission eye diagram performance.

　　

　　5g fronthaul

　　

　　Flexible wavelength management: 96 channels are adjustable. When the optical power and eye diagram change, the wavelength adjustment is automatically completed within 3-5 seconds to ensure the correct wavelength and simplify network operation and maintenance.

　　

　　5g fronthaul

　　

　　Low power consumption design: The power consumption is less than 2W in commercial mode and less than 2.5W in industrial mode, meeting energy-saving standards.

　　

　　3.jpg

　　

　　Environmental adaptability: Commercial temperature range 0≧ to 70≧, industrial temperature range -40≧ to 85≧, meeting diverse environmental needs.

　　If the international express information is filled in incorrectly, will the package be returned? Faced with this situation, many people may feel anxious and confused.With the upsurge of industry development, shipping agent The expressive force in the market has also been very good, bringing many brand-new high-quality experiences to users. https://flyportt.com/

　　

　　Don¨t panic, today FLY will talk to you about the common problems encountered in package delivery and the solutions.

　　

　　Analyze calmly and confirm the problem

　　

　　When you find that there is a problem with the delivery of a package, the first thing to do is to calm down and carefully analyze the cause.

　　

　　Usually, there are several main reasons why the package is returned:

　　

　　1. The address is filled in incorrectly or incompletely, resulting in the courier company being unable to deliver accurately;

　　

　　> Generally, you need to contact the post office, re-provide the detailed address, and continue delivery.

　　

　　> Directly return to China.

　　

　　2. The recipient refuses to accept the goods or does not pick them up for a long time (usually about a week);

　　

　　Directly return to China

　　

　　3. Other issues;

　　

　　>The delivery shows that the item was signed for but it was not actually received

　　

　　>The card was not placed after delivery

　　

　　>The item was not delivered but the logistics shows that it needs to be picked up at the post office, etc.

　　

　　international parcel delivery

　　

　　For the above reasons, it is best to contact the local courier company directly to provide the courier number, correct delivery address and contact information, and request re-delivery or self-pickup.

　　

　　With the help of a third-party shipping company

　　

　　If you find it difficult or inconvenient to communicate with the courier company, you can consider seeking help from a third-party shipping company

　　

　　Specifically, a third-party shipping company can provide the following services:

　　

　　>Package tracking and tracing: Directly check the status of the package through the courier company’s system to understand the detailed reasons and location of the package return.

　　

　　>Return processing: After understanding the reason for the return, the freight forwarding company can assist you in communicating with the courier company to re-arrange the delivery or choose other appropriate solutions.

　　

　　>Change the delivery address: If you need to change the delivery address, the freight forwarding company can provide you with professional advice and guidance to ensure that the package can be delivered smoothly.

　　When we buy optical modules, we often see descriptions such as “compliant with a certain IEEE Ethernet standard” and “compatible with InfiniBand xDR protocol” in the introduction. So, as common communication network standards, InfiniBand (IB) and Ethernet (Ethernet), what are the specific differences?The data shows that, 400g qsfp-dd Its development potential should not be underestimated, and it is also the inevitability of its existence. https://www.3coptics.com/

　　

　　infiniband

　　

　　Design Goal

　　

　　InfiniBand (literally “infinite bandwidth” technology, abbreviated as IB) is a dedicated protocol originally designed for connections between servers, storage and network devices to meet the needs of data centers. It uses high-speed differential signal technology and multi-channel parallel transmission mechanism, with the main goal of providing high performance, low latency and high reliability.

　　

　　Ethernet is a general-purpose protocol that is widely used for local area network (LAN) and wide area network (WAN) communications. It uses the carrier sense multiple access/collision detection (CSMA/CD) mechanism to avoid collisions, and its main goals are simplicity, flexibility, and scalability.

　　

　　Transmission rate and latency

　　

　　InfiniBand supports multiple transmission modes, including SDR (single-channel reception), DDR (dual-channel reception), QDR (quad-channel reception), FDR (differential reception), EDR (extended differential reception), HDR (high-density reception), and NDR (narrowband differential reception). These transmission modes have different characteristics and advantages and are suitable for different application scenarios.

　　

　　Ethernet also supports multiple transmission rates, such as 10Mbps, 100Mbps, 1Gbps, 10Gbps, 25Gbps, 100Gbps, 200Gbps, 400Gbps, etc. However, the delay of Ethernet mainly depends on the performance of network devices and network traffic.

　　

　　Since InfiniBand uses faster transmission rates and dedicated hardware, it has a clear advantage in terms of latency. In contrast, Ethernet has a higher latency, mainly due to the complexity of the protocol stack and some additional processing steps.

　　

　　Reliability and Scalability

　　

　　InfiniBand has the characteristics of high reliability and low power consumption, which can meet the performance and reliability requirements of modern data centers. It uses high-speed differential signal technology and multi-channel parallel transmission mechanism to achieve extremely high data transmission rates and extremely low latency. In addition, InfiniBand also has the characteristics of high reliability and low power consumption, which can meet the performance and reliability requirements of modern data centers.

　　

　　Ethernet is a general-purpose protocol that is widely used for local area network (LAN) and wide area network (WAN) communications. It uses the carrier sense multiple access/collision detection (CSMA/CD) mechanism to avoid collisions, and its main goals are simplicity, flexibility, and scalability.

　　

　　Cost and Maintenance

　　

　　InfiniBand is a dedicated protocol that requires the use of specialized hardware and software. Therefore, the cost of InfiniBand is relatively high. However, since InfiniBand is designed specifically for data center environments, it has lower environmental requirements and lower maintenance costs.

　　

　　Ethernet is a universal protocol that can use standard Ethernet switches and network cards. Therefore, the cost of Ethernet is relatively low. However, due to the complexity of Ethernet design and configuration, the maintenance cost is high.

　　

　　Applicable fields

　　

　　Based on the characteristics of the two protocols, InfiniBand is mainly used in the field of high-performance computing, such as supercomputers, data centers, and scientific research institutions. Its advantages lie in high-speed transmission, low latency, and scalability.

　　

　　Ethernet is widely used in enterprise networks, Internet access, home networks and other fields. Its main advantages are low cost, standardization and wide support.

　　

　　In conclusion, InfiniBand and Ethernet are two different data center network communication technologies, and they differ in design goals, transmission rate and latency, reliability and scalability, cost and maintenance, and applicable fields. Based on the needs and limitations of actual application scenarios, you can choose a suitable protocol to meet specific requirements.

　　

　　With the development of technology and changes in the market, these two technologies are also constantly evolving and competing. In order to adapt to the growing needs of data centers, both Infiniband and Ethernet are undergoing continuous technological innovation and upgrading. For example, Ethernet continues to improve network performance and reliability by introducing new technologies such as non-blocking network design and switch topology; while Infiniband is also constantly optimizing performance and reducing costs to expand its application scope.

　　Dear future international students, the excitement and anxiety of stepping into a foreign land coexist, especially the concern that the high prices abroad will make the already limited living expenses even more difficult?To get brand praise, shipping agent It is necessary to have the spirit of constantly improving the quality of products, but also to have a bunch of eternal heart fire. https://flyportt.com/

　　

　　Don’t be afraid, FLY has prepared a series of recommended mailing items for you to study abroad, making your study abroad journey easy and comfortable!

　　

　　Lifestyle category:

　　

　　Conversion plug: Different countries have different socket standards. With a few conversion plugs, your electronic devices can seamlessly connect to foreign power sources, avoiding the embarrassment of “power shortage”.

　　

　　Paper drawer and storage box: Although they can also be purchased abroad, the price is often expensive. Sending in advance is both economical and environmentally friendly, and can also be selected according to personal preferences, improving the quality of life.

　　

　　Garbage bags and slippers: These small items may seem inconspicuous, but they are indispensable in daily life. There are various varieties and affordable prices in China, making it a must-have item in study abroad luggage.

　　

　　Glasses: Especially for friends with vision needs, foreign glasses are not only expensive, but may also face language communication barriers. Prepare spare glasses in advance, which is both worry free and cost-effective.

　　

　　international students

　　

　　Food category:

　　

　　Potato chips, Luosifen, instant noodles: These snacks not only satisfy your Chinese stomach, but also are the best choice to alleviate homesickness. Although substitutes can be found abroad, the taste is always slightly inferior.

　　

　　Hotpot seasoning and rice noodles: On weekends, make a few friends and cook a authentic Chinese hotpot or rice noodle dish by yourself. It’s warm and satisfying, instantly bringing you closer to your hometown.

　　

　　Spicy sauce: For friends who enjoy spicy food, a bottle of hometown style spicy sauce is the best seasoning for overseas life. Every bite is the taste of home, bringing comfort to homesickness.

　　

　　international students

　　

　　Accessories category:

　　

　　Contact lenses, false eyelashes, and wearing armor: These beauty accessories can help you maintain your personality and fashion even in a foreign land, and there are many choices in China with obvious price advantages.

　　

　　Phone case and earring necklace: compact and lightweight, easy to carry, and replaceable at any time, allowing you to showcase your unique charm in different occasions

　　

　　Electrical appliances:

　　

　　Rice cookers and kettles: Cooking Chinese food by oneself is both healthy and economical. Domestic brands are diverse and fully functional, making them more affordable than purchasing from abroad.

　　

　　Folding washing machine: For international students with limited living space, folding washing machines are simply a miracle tool, easily solving the problem of changing laundry.

　　

　　Electric boiling pot and hair dryer: multifunctional electric boiling pot with one pot and multiple uses, convenient and fast; Hair dryers are essential tools for daily hair care, and choosing domestic brands offers high cost-effectiveness.

　　

　　international students

　　

　　If you are not used to life/food when studying abroad, you can transfer more daily necessities and snacks abroad, so that you won’t be so painful at the beginning!

　　What Factors Should You Consider When Customizing Medals?Under people’s attention custom medals Finally grow into what people need, born for the market and come for the demand. https://www.karonmetal.com

　　

　　1. The style of medal design

　　

　　The first factor of metal medals is the style and style of medal design. The shape should be special and not vulgar, which is a rare type on the market.

　　

　　2. The material of medal production

　　

　　From the current needs of users of medal production, it is obvious that bronze medals and stainless steel medals can no longer meet the high-end needs of customers. The choice of medal material determines whether the medal is high-end.

　　

　　3. The process of medal production

　　

　　In the medal production industry, the production process and production process used to make the medal will make the medal show its original medal value orientation in terms of high-end and uniqueness.

　　

　　4. The primary and secondary distinction of medals

　　

　　In the production of custom metal medals, it is necessary to determine the primary and secondary of the style and style of the medal, the content and text, and the award-giving and winning needs.

　　

　　5. The font standard of the medal

　　

　　Many medals claim to be high-end medals, but the fonts in the medals will not be selected. What font is set for the main title of the medal and what font is set for the text, they have no idea. All commonly used fonts need to be understood.

　　

　　

　　6. Correct content of medals

　　

　　When advanced unit medals and civilized unit medals are often required to be high-end, the most easily overlooked thing is the comparison of medal content. When making a medal, it is very important to compare and check the content of the medal.

　　

　　7. Perfect details of medals

　　

　　In the daily production of metal medals, there will be many details to be carefully improved. In addition to the main big things, it is also necessary to strengthen the attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　

　　8. Clean layout of medals

　　

　　I believe no one will like the colorful medal layout. Clean here does not mean dirty, but mainly refers to chaos and disorder.

　　

　　9. The price of medal production

　　

　　One cent for one product has always been the value law of any industry and any commodity. It is now difficult to obtain high-end products at a very low price.

　　

　　10. The medal is beautifully packaged

　　

　　The packaging of metal medals is like our attire and clothing. The color matching is natural and elegant. The outer packaging of metal medals is matched. Whether to use ordinary paper boxes or high-end wooden brocade boxes is very particular. The packaging depends entirely on the high-end and authoritative nature of the recipient of the medal.

　　Membrane switch, also known as touch keyboard, adopts an overall sealed structure composed of multiple layers of planes. It is a new type of electronic component that integrates optics, machinery and electricity, sealing the key switch, panel, mark, symbol display and lining together. Next, we will explain the structure of membrane switch to you.for a long time silicone rubber keyboard It has an extraordinary development speed, and I believe that the future will be as overwhelming as ever. https://singway-touch.com/

　　

　　membrane switch structure

　　

　　1. Panel layer

　　

　　The panel layer is generally a colorless and light-transmitting sheet of less than 0.25MM such as PET and PC with exquisite patterns and texts printed on it. Because the main function of the panel layer is to play the role of marking and button, the selected material must have high transparency. , high ink adhesion, high elasticity, high toughness and other characteristics.

　　

　　2. Surface adhesive layer

　　

　　The main function of the surface adhesive is to tightly connect the panel layer and the circuit layer to achieve a sealed connection. This layer is generally required to be between 0.05-0.15MM thick and have high viscosity and anti-aging properties; special membrane switch double-sided adhesive is generally used in production. Some membrane switches need to be waterproof and high temperature resistant. Therefore, the surface adhesive must also use materials with different properties according to needs.

　　

　　3. Upper and lower layers of the control circuit

　　

　　This layer uses high-performance polyester film (PET) as the carrier of the switch circuit pattern, and uses a special process to screen-print conductive silver paste and conductive carbon paste on it to make it conductive. Its thickness is generally within 0.05-0.175MM, and the most common is 0.125MMPET.

　　

　　4. Interlayer

　　

　　It is located between the upper circuit and the lower circuit layer, and plays a role in sealing and connecting. Generally, PET double-sided tape is used, and its thickness ranges from 0.05 to 0.2MM; when selecting the material of this layer, the integrity of the product should be fully considered. Thickness, insulation, circuit key package feel and sealing.

　　

　　5. Adhesive layer

　　

　　The use of adhesive is closely related to the material to which the membrane switch is attached. Commonly used ones include double-sided adhesive, 3M adhesive, waterproof adhesive, etc.